Materials:
Body: die-cast zinc Z410 (model series 5: aluminium), diaphragms and seals: NBR, condensate container: polycarbonate (Model series Mini: spring hood: POM)
Temperature range:
-10 to +60 °C
Input pressure:
1.5 - 16 bar (with metal bowl 1.5 - 25 bar, model series 8: 1.5 - 20 bar)
Condensate draining:
semi-automatic**
Media:
Compressed air, neutral gases
ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU
Advantages:
•automatic venting in the event of overpressure on the secondary side,
•can be filled with oil while under pressure
Version:
Self-relieving filter regulator with attached lubricator
Pressure gauge connection:
G 1/8"
Switch panel thread:
M 30x1,5
Max. condensate amount:
16 cm³
Pore width in the filter:
5 µm
Lubricator reaction limit (at 6 bar):
40 l/min
Oil supply:
17 cm³
Oil metering at 250 l/min:
2 - 5 drops /10 min
Scope of delivery:
Air unit, including 40 mm pressure gauge
Optional:
Design with metal bowl*** (1.5 - 25 bar) -M, automatic drain**** -AM, automatic discharge closed when not pressurised**** (0 - 16 bar) -AMNC
Advantages:
•Handwheel can be locked by pressing it down
*Standard series, please prefer for use, since the pressure control range is universally usable, **As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented, ***drip cap of plastic, ****in conjunction with metal bowl max. 16 bar
{{ $t('shop.all.dokumente') }}: