QST-G1/8-4-100 (132066) push-in T-fitting

Item number:

OT-FESTO024367

pcs
Also notice our alternatives
Our alternatives with the same function and size
QST-G1/8-4 (186157) push-in T-fitting (OT-FESTO015624)
186157
QST-G1/8-4 (186157) push-in T-fitting
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Our alternatives (similar item) This is based on our general assessment. Please check that the item is suitable for your special operating case. If in doubt, please ask us for advice.
T push in fitting G 1/8"-4mm, IQS standard (IQST 184 G)
IQST 184 G
T push in fitting G 1/8"-4mm, IQS standard
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Properties
size Standard
Nominal width [mm] 2,8
Seal type on stud gasket
installation position arbitrary
Packing size 100
Construction set up Push-pull principle
Operating pressure complete temperature range [bar] -0.95 to 6
Temperature depending operating pressure [bar] -0.95 to 14
Maritime classification see Certificate
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-],
Water according to manufacturer declaration at www.festo.com
Information about operating and control medium Oiled operation possible
Corrosion resistant class KBK 1 - low corrosion stress
ambient temperature [°C] -10 to 80
Product weight [g] 15,0
Pneumatic connection 1 Male thread G1/8
Pneumatic connection 2 For hose exterior diameter 4 mm
Sleeve colour blue
Material information RoHs compliant
Housing material PBT
Sleeve material POM
Tube seal, hose seal material NBR
Hose clamping segment material High-alloyed stainless steels
Number of outlets 2
Number of supply lines 1
Nominal tightening torque [Nm] 7,00
Tolerance to nominal tightening torque ± 20 %
Further information on OT-FESTO024367
Weight 15,0 g / pcs
Packing unit 100 pcs
Customs duty number 74122000
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available