DSMI-40-270-A-B (561691) semi-rotary drive

OT-FESTO024938

{{ $t('shop.display.artikel.link_zur_artikelgruppe') }}
Exemplary representation: DSMI-40-270-A-B (561691) Exemplary representation: DSMI-40-270-A-B
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Settings range swivel angle [deg] 0 to 270
Stroke reduction at the end positions 5 °
Smallest positioning stroke 15° for soft stop,
5° during positioning
Piston diameter 40 mm
Swivel angle [deg] 0 to 272
Dampening P: Elastic silencer rings / plates double-sided
Position the integration location arbitrary
Integration position soft stop horizontal
Measurement principle travel measurement system Analogue
Construction set up Drive shaft ball bearing mounted,
Rotary vane
Position detection With Angle measurement system integrated,
For proximity switch
Operating pressure positioning / soft stop [bar] 4 to 8
Max. swivel frequency at 6 bar [Hz] 2
Max. movement speed [deg/s] 2.000
Min. movement speed [deg/s] 50
Typical positioning time short stroke, horizontal 0,25/0,25 s
Typical positioning time long stroke, horizontal 0,30/0,55 s
Connection resistance [kOhm] 5
Recommended grinder current [µA] < 1 µA
Principle of operation double acting
Max. operating voltage DC [V] 42
Max. grinder current short term [µA] 10.000
Max. power input [mA] 4
Nominal operating voltage DC [V] 10
Tolerance connection resistance [%] 20
Permitted voltage oscillations < 1 %
CE certificate (see declaration of conformity) to EU EMC directive
Operating medium Compressed air to ISO 8573-1:2010 [6:4:4]
Information about operating and control medium Oiled operation not possible
Continuous impact strength DIN&EC 68 parts 2-82 Tested to severity class 2
Corrosion resistant class KBK 0 - No corrosion stressing
Protection category IP65,
acc. to IEC 60529
Oscillation strength to DIN/IEC 68 part 2-6 Tested to severity class 2
ambient temperature [°C] -10 to 60
Impact energy at the end positions [J] 0,10
Max. axial force [N] 120
Max. mass inertia, horizontal [kg/m²] 0,12
Max. mass inertia, vertical [kg/m²] 0,12
Max. radial force [N] 350
Min. mass moment of inertia, horizontal [kg/m²] 0,0060
Min. mass moment of inertia, vertical [kg/m²] 0,0060
Theoretical torque at 6 bar [Nm] 20
Product weight [g] 3.950
Resolution angle [deg] <= 0,1 deg
output signal Analogue
Independent linearity 0,0025
Repeatability positioning ± 0,3 deg
Repeatability soft stop end position < 0.2 deg
Repeatability soft stop intermediate position ± 2 deg
Electrical connection: path measurement system 4 pin
Cable length [MTR] 30
Fastening type with female thread
Pneumatic connection G1/8
Housing measurement system material Aluminium wrought alloy,
anodized
Material information Copper and PTFE-free
Stopper lever material Aluminium wrought alloy,
anodized
Drive shaft material Nickel-plated steel
Fixed limit stop material Steel
Housing material Aluminium wrought alloy,
anodized
Measurement system coupling material TPE-U(PU)
Feather key material Steel
Rotary vane material PET reinforced
Plug housing material PA reinforced
Cylinder tube material Aluminium wrought alloy
OT-FESTO024938
{{ $t('shop.all.gewicht') }} 3.950 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 84123900
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}
{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.