2/2-way ES solenoid valve G 1", 0,3 to 20 bar, open (NO) without power

Materials:
Body G 1/8" and G 1/4": 1.4104, G 1/2" to G 2": 1.4581 (internal parts 1.4104), seal: FKM

Temperature range:
-20 to +130 °C, ambience: -10 to +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, other media on request

Installation position:
With upright magnets, (G 3/8" - G 2" also with horizontal magnets)

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).

Control voltage	12 V DC
function	open (NO) without power
Thread	G 1"
Operating pressure [bar]	0,3 - 20
DN [mm]	25
L [mm]	95
Kv value* [l/min]	216
Power consumption (DC) [W]	18,5
Structural shape solenoid coil	B
Spare solenoid coil	MAG B 12V=

{{ $t('shop.display.artikel.zollwarennummer') }}

84812090